弁財天

ゴフマン「専門家を信じるのではなく、自分自身で考えて判断せよ」

firmware-b43-installer と firmware-b43legacy-installer update8

google.com→firmware-b43-installer firmware-b43legacy-installer

ググると大量にでてくるエラーには意味があるのだw

root@localhost:~# LANG=C apt upgrade
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
The following packages have been kept back:
  libgdal26 python3-tables-lib
0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
2 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up firmware-b43-installer (1:019-5) ...
No chroot environment found. Starting normal installation
--2020-05-13 19:33:34--  https://www.lwfinger.com/b43-firmware/broadcom-wl-6.30.163.46.tar.bz2
Connecting to 192.168.13.2:8118... connected.
Proxy request sent, awaiting response... 200 OK
Length: 7684610 (7.3M) [application/x-tar]
Saving to: 'broadcom-wl-6.30.163.46.tar.bz2'

broadcom-wl-6.30.163.46.tar.bz2  100%[=======================================================>]   7.33M  3.19MB/s    in 2.3s    

2020-05-13 19:33:37 (3.19 MB/s) - 'broadcom-wl-6.30.163.46.tar.bz2' saved [7684610/7684610]

broadcom-wl-6.30.163.46.tar.bz2: OK
broadcom-wl-6.30.163.46.wl_apsta.o
/var/lib/dpkg/info/firmware-b43-installer.postinst: Deleting old extracted firmware...
rm: cannot remove '/lib/firmware/b43/lp0initvals14.fw': No such file or directory
rm: cannot remove '/lib/firmware/b43/lcn0bsinitvals25.fw': No such file or directory

…略

dpkg: error processing package firmware-b43-installer (--configure):
 installed firmware-b43-installer package post-installation script subprocess returned error exit status 123
Setting up firmware-b43legacy-installer (1:019-5) ...
No chroot environment found. Starting normal installation
--2020-05-13 19:33:38--  https://downloads.openwrt.org/sources/wl_apsta-3.130.20.0.o
Connecting to 192.168.13.2:8118... connected.
Proxy request sent, awaiting response... 301 Moved Permanently
Location: https://sources.openwrt.org/wl_apsta-3.130.20.0.o [following]
--2020-05-13 19:33:40--  https://sources.openwrt.org/wl_apsta-3.130.20.0.o
Connecting to 192.168.13.2:8118... connected.
Proxy request sent, awaiting response... 200 OK
Length: 652866 (638K) [application/octet-stream]
Saving to: 'wl_apsta-3.130.20.0.o'

wl_apsta-3.130.20.0.o            100%[=======================================================>] 637.56K   169KB/s    in 3.8s    

2020-05-13 19:33:45 (169 KB/s) - 'wl_apsta-3.130.20.0.o' saved [652866/652866]

wl_apsta-3.130.20.0.o: OK
/var/lib/dpkg/info/firmware-b43legacy-installer.postinst: Deleting old extracted firmware...
rm: cannot remove '/lib/firmware/b43legacy/ucode2.fw': No such file or directory
rm: cannot remove '/lib/firmware/b43legacy/ucode4.fw': No such file or directory
rm: cannot remove '/lib/firmware/b43legacy/ucode5.fw': No such file or directory
rm: cannot remove '/lib/firmware/b43legacy/ucode11.fw': No such file or directory
rm: cannot remove '/lib/firmware/b43legacy/pcm4.fw': No such file or directory
rm: cannot remove '/lib/firmware/b43legacy/pcm5.fw': No such file or directory
rm: cannot remove '/lib/firmware/b43legacy/a0g0bsinitvals2.fw': No such file or directory
rm: cannot remove '/lib/firmware/b43legacy/b0g0bsinitvals5.fw': No such file or directory
rm: cannot remove '/lib/firmware/b43legacy/a0g0initvals5.fw': No such file or directory
rm: cannot remove '/lib/firmware/b43legacy/a0g1bsinitvals5.fw': No such file or directory
rm: cannot remove '/lib/firmware/b43legacy/a0g0initvals2.fw': No such file or directory
rm: cannot remove '/lib/firmware/b43legacy/a0g1initvals5.fw': No such file or directory
rm: cannot remove '/lib/firmware/b43legacy/b0g0bsinitvals2.fw': No such file or directory
rm: cannot remove '/lib/firmware/b43legacy/b0g0initvals5.fw': No such file or directory
rm: cannot remove '/lib/firmware/b43legacy/b0g0initvals2.fw': No such file or directory
rm: cannot remove '/lib/firmware/b43legacy/a0g0bsinitvals5.fw': No such file or directory
dpkg: error processing package firmware-b43legacy-installer (--configure):
 installed firmware-b43legacy-installer package post-installation script subprocess returned error exit status 123
Errors were encountered while processing:
 firmware-b43-installer
 firmware-b43legacy-installer
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@localhost:~#
root@localhost:~# dpkg --audit
以下のパッケージは最初の設定中に問題が発生したため、設定が終了していません。
dpkg --configure <パッケージ> か dselect で設定 (configure) メニューオプショ
ンを使って設定作業を再試行しなければなりません:
 firmware-b43-installer firmware installer for the b43 driver
 firmware-b43legacy-installer firmware installer for the b43legacy driver

root@localhost:~#
root@localhost:~# dpkg --configure firmware-b43-installer
firmware-b43-installer (1:019-5) を設定しています ...
No chroot environment found. Starting normal installation
--2020-05-13 19:36:17--  https://www.lwfinger.com/b43-firmware/broadcom-wl-6.30.163.46.tar.bz2
192.168.13.2:8118 に接続しています... 接続しました。
Proxy による接続要求を送信しました、応答を待っています... 200 OK
長さ: 7684610 (7.3M) [application/x-tar]
`broadcom-wl-6.30.163.46.tar.bz2' に保存中

broadcom-wl-6.30.163.46.tar.bz2  100%[=======================================================>]   7.33M  2.07MB/s 時間 4.0s     

2020-05-13 19:36:22 (1.84 MB/s) - `broadcom-wl-6.30.163.46.tar.bz2' へ保存完了 [7684610/7684610]

broadcom-wl-6.30.163.46.tar.bz2: 完了
broadcom-wl-6.30.163.46.wl_apsta.o
/var/lib/dpkg/info/firmware-b43-installer.postinst: Deleting old extracted firmware...
rm: '/lib/firmware/b43/lp0initvals14.fw' を削除できません: そのようなファイルやディレクトリはありません
rm: 'に一致するパスが見つかりません' を削除できません: そのようなファイルやディレクトリはありません
…略
rm: '/lib/firmware/b43/ht0bsinitvals29.fw' を削除できません: そのようなファイルやディレクトリはありません
rm: 'に一致するパスが見つかりません' を削除できません: そのようなファイルやディレクトリはありません
dpkg: パッケージ firmware-b43-installer の処理中にエラーが発生しました (--configure):
 installed firmware-b43-installer package post-installation script subprocess returned error exit status 123
処理中にエラーが発生しました:
 firmware-b43-installer
root@localhost:~#

qrunch.net→KaliLinuxでfirmware-b43-installerのエラーが出た時の対策

root@localhost:/var/lib/dpkg/info# ls -d firmware-b43*
firmware-b43-installer.list	 firmware-b43-installer.prerm	       firmware-b43legacy-installer.postinst
firmware-b43-installer.md5sums	 firmware-b43legacy-installer.list     firmware-b43legacy-installer.prerm
firmware-b43-installer.postinst  firmware-b43legacy-installer.md5sums
root@localhost:/var/lib/dpkg/info# rm -rf firmware-b43*
root@localhost:/var/lib/dpkg/info#
「rm -rf firmware-b43*」w
root@localhost:~# dpkg --configure firmware-b43-installer
firmware-b43-installer (1:019-5) を設定しています ...
root@localhost:~# LANG=C apt upgrade
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
The following packages have been kept back:
  libgdal26 python3-tables-lib
0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up firmware-b43legacy-installer (1:019-5) ...
root@localhost:~# LANG=C apt upgrade
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
The following packages have been kept back:
  libgdal26 python3-tables-lib
0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
root@localhost:~# apt upgrade
root@localhost:~# apt upgrade libgdal26
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 libnetcdf15 : Depends: libhdf5-103 but it is not going to be installed
E: Broken packages
root@localhost:~#
root@localhost:~# apt search libhdf5-103
Sorting... Done
Full Text Search... Done
libhdf5-103/kali-rolling,now 1.10.4+repack-11 amd64 [installed]
  Hierarchical Data Format 5 (HDF5) - runtime files - serial version

libhdf5-103-1/kali-rolling 1.10.6+repack-2 amd64
  HDF5 C runtime files - serial version

root@localhost:~#
libhdf5-103とlibhdf5-103-1、微妙に違うパッケージがふたつあり、依存関係が壊れて導入エラーになりアップグレードがコケるw

じゃぁ、足りない方(libhdf5-103-1)を導入しちゃえばいいんじゃね?w、コンピュータって短絡的で安直なんだろw

nceas.github.io→Hierarchical data form ats

About Hdf4

hdf4 is one of the early hierarchical data structures. One common use of H4 is seen in the MODIS satellite data. There is a known structure associated with these data and the data can be opened in R using the gdalutils package.

「MODIS satellite data」w この障害って何かヒントなのかすら?w

nasa.gov→MODIS Web

NASAのMODIS(Moderate Resolution Imaging Spectororadiometer)

wikipedia.org→MODIS (MODerate resolution Imaging Spectroradiometer)

「地表、大気中微粒子および大気からの放射を観測することにより、エアロゾルの光学的特性(光学的厚さ、粒径分布)、雲分布、海面水温、海色(クロロフィルa濃度)、積雪分布、雪氷面温度、陸上の植生指数、森林火災の検出などの地球環境に関する諸量が求められる。」w

オゾンホール?

いやいやブロードコムの無線LANファームウェアとNASAの衛星データに関連が?w )NASAのドラえもんw


私はプログラマーとしてNASAに勤務し、 エクソン・モービルや運輸省にも勤務していました。

【パラダイス文書】2000年11月7日の米大統領選挙に介入。ジョージ・W・ブッシュを勝たせる禿w。ラザラスな孫正義とソフトバンクとアクセンチュア(アーサー・アンダーセン・シンガポール)w

2016年10月12日のJAXA「いぶき」管制とソフト開発をしていた社員の過労死と高橋まつりの類似点…

日本電子計算のNTTデータのEMCストレージ不具合で全国50自治体システムが停止。復旧できなくなるw

root@localhost:~# apt-get install libhdf5-103-1
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following additional packages will be installed:
  libgdal26 libhdf5-hl-100 libnetcdf18 python3-tables-lib
The following packages will be REMOVED:
  libhdf5-103 libnetcdf15
The following NEW packages will be installed:
  libhdf5-103-1 libhdf5-hl-100 libnetcdf18
The following packages will be upgraded:
  libgdal26 python3-tables-lib
2 upgraded, 3 newly installed, 2 to remove and 0 not upgraded.
Need to get 8569 kB of archives.
After this operation, 2238 kB disk space will be freed.
Do you want to continue? [Y/n] y
Get:1 http://ftp.riken.jp/Linux/kali kali-rolling/main amd64 python3-tables-lib amd64 3.6.1-2+b2 [509 kB]
Get:2 http://ftp.riken.jp/Linux/kali kali-rolling/main amd64 libgdal26 amd64 3.0.4+dfsg-1+b4 [6395 kB]
Get:3 http://ftp.riken.jp/Linux/kali kali-rolling/main amd64 libhdf5-103-1 amd64 1.10.6+repack-2 [1185 kB]
Get:4 http://ftp.riken.jp/Linux/kali kali-rolling/main amd64 libhdf5-hl-100 amd64 1.10.6+repack-2 [81.6 kB]
Get:5 http://ftp.riken.jp/Linux/kali kali-rolling/main amd64 libnetcdf18 amd64 1:4.7.4-1 [399 kB]
Fetched 8569 kB in 4s (2109 kB/s)   
Reading changelogs... Done
dpkg: warning: files list file for package 'firmware-b43-installer' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'firmware-b43legacy-installer' missing; assuming package has no files currently installed
(Reading database ... 320102 files and directories currently installed.)
Preparing to unpack .../python3-tables-lib_3.6.1-2+b2_amd64.deb ...
Unpacking python3-tables-lib (3.6.1-2+b2) over (3.6.1-2) ...
Preparing to unpack .../libgdal26_3.0.4+dfsg-1+b4_amd64.deb ...
Unpacking libgdal26 (3.0.4+dfsg-1+b4) over (3.0.4+dfsg-1+b1) ...
dpkg: warning: files list file for package 'firmware-b43-installer' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'firmware-b43legacy-installer' missing; assuming package has no files currently installed
(Reading database ... 320095 files and directories currently installed.)
Removing libnetcdf15:amd64 (1:4.7.3-1) ...
Removing libhdf5-103:amd64 (1.10.4+repack-11) ...
Selecting previously unselected package libhdf5-103-1:amd64.
dpkg: warning: files list file for package 'firmware-b43-installer' missing; assuming package has no files currently installed
dpkg: warning: files list file for package 'firmware-b43legacy-installer' missing; assuming package has no files currently installed
(Reading database ... 320076 files and directories currently installed.)
Preparing to unpack .../libhdf5-103-1_1.10.6+repack-2_amd64.deb ...
Unpacking libhdf5-103-1:amd64 (1.10.6+repack-2) ...
Selecting previously unselected package libhdf5-hl-100:amd64.
Preparing to unpack .../libhdf5-hl-100_1.10.6+repack-2_amd64.deb ...
Unpacking libhdf5-hl-100:amd64 (1.10.6+repack-2) ...
Selecting previously unselected package libnetcdf18:amd64.
Preparing to unpack .../libnetcdf18_1%3a4.7.4-1_amd64.deb ...
Unpacking libnetcdf18:amd64 (1:4.7.4-1) ...
Setting up libhdf5-103-1:amd64 (1.10.6+repack-2) ...
Setting up libhdf5-hl-100:amd64 (1.10.6+repack-2) ...
Setting up python3-tables-lib (3.6.1-2+b2) ...
Setting up libnetcdf18:amd64 (1:4.7.4-1) ...
Setting up libgdal26 (3.0.4+dfsg-1+b4) ...
Processing triggers for libc-bin (2.30-4) ...
root@localhost:~#
root@localhost:~# apt upgrade          
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@localhost:~# 
アップグレード(apt upgrade)成功w

ペネトレーションテスト向けOSがなぜ公開されメンテされ続けているのかわからなかったのだけど、これをRPAで操作するAIが機密なのであってKALI Linux自体は機密ではないのだなw、むしろテスト環境… )産総研のドラえもんw


同じ日に2つの銀行をハックするなんてのはそもそもヒトではないのだろう…

「フードの下のラザラス(Lazarus Under The Hood)」な西室泰三と今井尚哉w

投稿されたコメント:

コメント
コメントは無効になっています。